ST1305 Machining Technician: practice questions and mock tests
A 30-question test with a published six-section allocation covering safety, environment, maths, materials, maintenance and digital manufacturing.
Apprentices registered to ST1305 version 1.5 and preparing for the knowledge-test part of the Level 3 end-point assessment.
Standard
ST1305
Version
v1.5
Level
3
Exam at a glance
ST1305 · version 1.5
- Questions / papers
- 30 questions
- Time allowed
- 60 minutes
- Pass requirement
- 21/30
- Reference policy
- Closed book
What is the ST1305 Machining Technician test?
The ST1305 knowledge test checks whether a machining apprentice can connect safe working and engineering science to materials, standards, maintenance and modern production technology.
This page focuses on the knowledge-test method. The full end-point assessment may also include practical, observation or professional-discussion methods. Use the official assessment-plan links below to check the complete EPA.
When you take it
It is normally taken during end-point assessment, after the apprentice has completed training and passed through gateway. The employer, training provider and end-point assessment organisation agree the booking and sequence.
- 01
Training
Build the occupational knowledge, practical competence and workplace evidence.
- 02
Gateway
The employer confirms the apprentice is ready to enter end-point assessment.
- 03
Knowledge test
Sit the ST1305 multiple-choice knowledge test.
- 04
Other EPA methods
Complete the practical, observation or discussion methods specified by the assessment plan.
Try a practice question
ST1305 · Original practice material
A machining technician is reviewing health and safety law, duties and machinist responsibilities.
Under UK health and safety law, who has the primary duty to provide safe plant and systems of work?
Choose one answer, then check it.
ST1305 exam format and scoring
These are the recorded rules for this standard version. Always compare them with the final joining instructions from your end-point assessment organisation.
Delivery
Controlled and closed book.
Question style
30 four-option multiple-choice questions with one correct answer.
Books and materials
A scientific calculator is permitted.
| Paper | Coverage | Questions | Time | Grade boundary |
|---|---|---|---|---|
| Knowledge test | K1, K2, K3, K5, K7, K8, K17, K20 and S9 | 30 | 60 minutes | Pass 21–25/30Distinction 26–30/30 |
What to revise for ST1305
The current published Trade Exams library for this standard contains 400 original practice questions and 48 focused fact sheets. These are revision-library counts, not official exam weightings.
Knowledge-area map
Standard reference
ST1305
Machining control loop
- ASafety, standards and SOPs
- BWaste and sustainability
- CEngineering maths and science
- DEngineering materials
- EHousekeeping and maintenance
- FIndustry 4.0 and digitalisation
Safety, standards and SOPs
01K1 and K8; eight questions in the cited provider allocation.
Waste and sustainability
02K2 and K3; hazardous waste, environmental impacts and controls.
Engineering maths and science
03K5 and S9; seven applied calculation and science questions.
Engineering materials
04K7; properties, selection, behaviour, failure and application.
Housekeeping and maintenance
05K17; production-area care and equipment reliability.
Industry 4.0 and digitalisation
06K20; connected data, automation and modern manufacturing technology.
How to prepare for the ST1305 test
A practical four-stage revision sequence: understand the rules first, close topic gaps, practise decisions, then rehearse under the real time pressure.
- 1
Use the 8:4:7:7:2:2 section allocation when building realistic provider-style mocks.
- 2
Practise engineering calculations and unit handling with a scientific calculator.
- 3
Connect material behaviour and failure to machining choices rather than memorising lists.
- 4
Do not neglect the two-question maintenance and digital sections; every mark contributes to the grade.
Revision access
Questions, mocks and fact sheets
One exam, one clear price. Access ends automatically and never renews into a subscription.
£10
30 days of access
Everything for this exam for 30 days.
One-off payment. No automatic renewal.
£20
90 days of access
Everything for this exam for 90 days.
One-off payment. No automatic renewal.
ST1305 exam questions answered
Format, timing, version, preparation and booking questions—answered from the recorded standard and assessment-plan sources.
01What is the ST1305 Machining Technician exam?
The ST1305 knowledge test checks whether a machining apprentice can connect safe working and engineering science to materials, standards, maintenance and modern production technology. This page focuses on the knowledge-test method; the full end-point assessment may also contain practical or discussion-based methods.
02Who should use this ST1305 revision page?
Apprentices registered to ST1305 version 1.5 and preparing for the knowledge-test part of the Level 3 end-point assessment.
03When do apprentices take the ST1305 knowledge test?
It is normally taken during end-point assessment, after the apprentice has completed training and passed through gateway. The employer, training provider and end-point assessment organisation agree the booking and sequence.
04What is the ST1305 exam format?
Multiple-choice knowledge test. Controlled and closed book. 30 four-option multiple-choice questions with one correct answer.
05How many questions are there and how long does the test take?
30 questions and 60 minutes. Knowledge test: 30 questions, 60 minutes, pass 21–25/30.
06What is the ST1305 pass mark?
21/30. Knowledge test: pass 21–25/30; distinction 26–30/30. The cited provider allocation is 8:4:7:7:2:2 questions across sections A–F; another EPAO may publish a different internal sampling plan while following the national KSB mapping.
07Is the ST1305 test open book?
Closed book. A scientific calculator is permitted.
08What subjects should I revise for ST1305?
The main areas are Safety, standards and SOPs, Waste and sustainability, Engineering maths and science, Engineering materials, Housekeeping and maintenance and Industry 4.0 and digitalisation. The detailed coverage on this page stays within the knowledge mapped to this assessment method.
09How should I prepare for the ST1305 exam?
Use the 8:4:7:7:2:2 section allocation when building realistic provider-style mocks. Practise engineering calculations and unit handling with a scientific calculator. Connect material behaviour and failure to machining choices rather than memorising lists. Do not neglect the two-question maintenance and digital sections; every mark contributes to the grade.
10Which version of ST1305 does this page cover?
ST1305 v1.5 is the approved Level 3 version for starts from 25 June 2024 at the source-check date.
11Are the Trade Exams questions official live exam questions?
No. Trade Exams' 400 practice questions and 48 fact sheets are independently authored revision material. They do not reproduce recalled, live, confidential or password-protected EPAO questions. The editorial bank mirrors the cited 8:4:7:7:2:2 live-paper question ratio at larger scale.
12Where do the ST1305 exam details come from?
The format and scope are based on the listed Skills England standard and end-point assessment sources, checked for this content pack on 2026-08-13. Always confirm late changes and booking instructions with the employer, training provider or EPAO.
13How does Trade Exams access work?
Access is a one-off £10 payment for 30 days or £20 for 90 days. It never renews automatically.
Official sources and currency
Check the standard behind this page
The format and scope were checked on 13 August 2026. Assessment arrangements can change, so confirm the final booking details with your employer, training provider or EPAO.
Keep browsing