ST0263 Craft Carpentry and Joinery: practice questions and mock tests
A 40-question Level 3 test of complex carpentry and joinery knowledge, including setting out, materials, manufacture, installation and safe use of machinery.
Apprentices registered to ST0263 version 1.3 and preparing for the knowledge-test part of their Level 3 end-point assessment.
Standard
ST0263
Version
v1.3
Level
3
Exam at a glance
ST0263 · version 1.3
- Questions / papers
- 40 questions
- Time allowed
- 70 minutes
- Pass requirement
- 25/40
- Reference policy
- Closed book
What is the ST0263 Craft Carpentry and Joinery test?
The ST0263 test checks the technical judgement behind advanced site carpentry or architectural joinery work, not only the ability to recognise tools and terminology.
This page focuses on the knowledge-test method. The full end-point assessment may also include practical, observation or professional-discussion methods. Use the official assessment-plan links below to check the complete EPA.
When you take it
It is normally taken during end-point assessment, after the apprentice has completed training and passed through gateway. The employer, training provider and end-point assessment organisation agree the booking and sequence.
- 01
Training
Build the occupational knowledge, practical competence and workplace evidence.
- 02
Gateway
The employer confirms the apprentice is ready to enter end-point assessment.
- 03
Knowledge test
Sit the ST0263 multiple-choice knowledge test.
- 04
Other EPA methods
Complete the practical, observation or discussion methods specified by the assessment plan.
Try a practice question
ST0263 · Original practice material
Risks are controlled most reliably by eliminating the hazard first, then using substitution, engineering and administrative controls before relying on personal protective equipment.
Which option is being described?
Choose one answer, then check it.
ST0263 exam format and scoring
These are the recorded rules for this standard version. Always compare them with the final joining instructions from your end-point assessment organisation.
Delivery
Controlled and closed book.
Question style
40 four-option multiple-choice questions with one correct answer.
Books and materials
A scientific calculator, pen and paper are permitted.
| Paper | Coverage | Questions | Time | Grade boundary |
|---|---|---|---|---|
| Knowledge test | Knowledge mapped to the ST0263 test | 40 | 70 minutes | Pass 25/40Distinction 33/40 |
What to revise for ST0263
The current published Trade Exams library for this standard contains 400 original practice questions and 20 focused fact sheets. These are revision-library counts, not official exam weightings.
Knowledge-area map
Standard reference
ST0263
Set out and make
- T01Safety and compliance
- T02Drawings and setting out
- T03Timber and materials
- T04Roofs and structural work
- T05First and second fix
- T06Joinery manufacture
Safety and compliance
01Safe systems, machinery, access, regulations and environmental control.
Drawings and setting out
02Specifications, geometry, datums, templates and accurate marking.
Timber and materials
03Species, sheet materials, moisture, defects, durability and selection.
Roofs and structural work
04Complex roof forms, framing, loads, interfaces and installation.
First and second fix
05Components, tolerances, sequencing and high-quality site installation.
Joinery manufacture
06Machines, joints, tooling, assembly, finishing and quality control.
How to prepare for the ST0263 test
A practical four-stage revision sequence: understand the rules first, close topic gaps, practise decisions, then rehearse under the real time pressure.
- 1
Practise setting-out calculations with the calculator that will be used in the assessment.
- 2
Link timber properties and moisture behaviour to selection and defect prevention.
- 3
Compare site-carpentry and bench-joinery decisions where the same material behaves differently.
- 4
Complete 40-question sessions inside 70 minutes, leaving time to check calculations.
Revision access
Questions, mocks and fact sheets
One exam, one clear price. Access ends automatically and never renews into a subscription.
£10
30 days of access
Everything for this exam for 30 days.
One-off payment. No automatic renewal.
£20
90 days of access
Everything for this exam for 90 days.
One-off payment. No automatic renewal.
ST0263 exam questions answered
Format, timing, version, preparation and booking questions—answered from the recorded standard and assessment-plan sources.
01What is the ST0263 Craft Carpentry and Joinery exam?
The ST0263 test checks the technical judgement behind advanced site carpentry or architectural joinery work, not only the ability to recognise tools and terminology. This page focuses on the knowledge-test method; the full end-point assessment may also contain practical or discussion-based methods.
02Who should use this ST0263 revision page?
Apprentices registered to ST0263 version 1.3 and preparing for the knowledge-test part of their Level 3 end-point assessment.
03When do apprentices take the ST0263 knowledge test?
It is normally taken during end-point assessment, after the apprentice has completed training and passed through gateway. The employer, training provider and end-point assessment organisation agree the booking and sequence.
04What is the ST0263 exam format?
Multiple-choice knowledge test. Controlled and closed book. 40 four-option multiple-choice questions with one correct answer.
05How many questions are there and how long does the test take?
40 questions and 70 minutes. Knowledge test: 40 questions, 70 minutes, pass 25/40.
06What is the ST0263 pass mark?
25/40. Knowledge test: pass 25/40; distinction 33/40.
07Is the ST0263 test open book?
Closed book. A scientific calculator, pen and paper are permitted.
08What subjects should I revise for ST0263?
The main areas are Safety and compliance, Drawings and setting out, Timber and materials, Roofs and structural work, First and second fix and Joinery manufacture. The detailed coverage on this page stays within the knowledge mapped to this assessment method.
09How should I prepare for the ST0263 exam?
Practise setting-out calculations with the calculator that will be used in the assessment. Link timber properties and moisture behaviour to selection and defect prevention. Compare site-carpentry and bench-joinery decisions where the same material behaves differently. Complete 40-question sessions inside 70 minutes, leaving time to check calculations.
10Which version of ST0263 does this page cover?
This page covers ST0263 version 1.3 and its mapped knowledge-test scope.
11Are the Trade Exams questions official live exam questions?
No. Trade Exams' 400 practice questions and 20 fact sheets are independently authored revision material. They do not reproduce recalled, live, confidential or password-protected EPAO questions.
12Where do the ST0263 exam details come from?
The format and scope are based on the listed Skills England standard and end-point assessment sources, checked for this content pack on 2026-07-29. Always confirm late changes and booking instructions with the employer, training provider or EPAO.
13How does Trade Exams access work?
Access is a one-off £10 payment for 30 days or £20 for 90 days. It never renews automatically.
Official sources and currency
Check the standard behind this page
The format and scope were checked on 29 July 2026. Assessment arrangements can change, so confirm the final booking details with your employer, training provider or EPAO.
Keep browsing